Materialien

Standard Hydrolic Materials

Elastomers
Material Code	Definition	Color	Hardness	Temperature Range (°C)	Product Groups	Description
NB7001	NBR	Black	70 Shore A	30/+105	K706, K716, K714, K702, K752, K15, K17, K41, K46, K501, K753, K757, K98, K114, K703, K705, KX, KO	Standart Material
NB7012	NBR	Black	70 Shore A	-50/+105	Products with the same code can be produced with NB7001	Low Temperature
NB8001	NBR	Black	80 Shore A	-30/+105	K16, K18, K19, K20, K34, K36, K37, K39, K42, K43, K48, K49, K88, K502, K503, K504, K505, K518, K704, K755	Standart Material
NB8010 N	NBR	Black	80 Shore A	40/+105	K19L	Low Temperature
NB9001	NBR	Black	90 Shore A	30/+105	K01, K04, K06, K07, K09, K10, K21, K22, K23, K26, K27, K95, K96, K154	Standart Material
NB9011	NBR	Black	70 Shore A	-40/+105	Products with the same code can be produced with NB9001	Low Temperature
FK8001	FKM	Brown	80 Shore A	-25/+200	Products with the same code can be produced with NB8001	High Temperature
FK9001	NBR	Brown	90 Shore A	-20/+200	Products with the same code can be produced with NB9001	Standart Material
HB7001	HNBR	Black	70 Shore A	-30/+150	Products with the same code can be produced with NB7001	Standart Material
HB7007	NBR	Black	70 Shore A	-40/+150	Products with the same code can be produced with NB8001	Low Temperature
HB8001	NBR	Black	80 Shore A	-30/+150	Products with the same code can be produced with NB8001	Standart Material
HB8005	NBR	Black	80 Shore A	-40/+150	Products with the same code can be produced with NB8001	Low Temperature
HB9001	NBR	Black	90 Shore A	-30/+150	K97	Standart Material

Thermoplastic Elastomers
Material Code	Definition	Color	Hardness	Temperature Range (°C)	Product Groups	Description
PU9201	TPU	Blue	92 Shore A	-40/+100	K06, K07, K09, K21, K22, K23, K27, K29, K46, K86, K98, K101, K103, K107	Standart Material
PU9204	TPU	Blue	92 Shore A	-50/+100	Products with the same code can be produced with PU9201	Low Temperature FDA, EU 10/2011
PU9401	TPU	Blue	92 Shore A	-35 /+100	KO, K05, K12, K13, K15, K31, K32, K33, K38, K40, K82, K83, K84, K85, K89, K94, K102, K114, FR200, XT200	Standart Material
PU9411	TPU	Cerise	94 Shore A	-35/+120	Products with the same code can be produced with PU9401	High Temperature
PU9404	TPU	Blue	94 Shore A	-35/+110	Products with the same code can be produced with PU9401	High Temperature and Abrasion Resistance
PU6001	TPU	Blue	60 Shore D	-30/+100	K49	High Pressure
TP5501	TPE	Grey	55 Shore D	-40/+100	K11, K34, K42, K48, K81	Standart Material
TP7301	TPE	Black	73 Shore D	-40/+100	K18, K503, K518.	Standart Material

Engineering Plastics
Material Code	Definition	Color	Hardness	Temperature Range (°C)	Product Groups	Description
PM9901	POM	White	-	-40/+100	K16, K18, K19, K20, K29, K31, K32, K34, K37, K40, K42, K43, K46, K48, K71, K77, K105, K151, K152/K153, K502, K503, K504, K505	Standart Material
PM9902	Glass Fiber POM	Black	-	-40/+110	K68, K69, K74, K155	High Load Bearing Capacity
NB8001	NBR	Black	-	-30/+105	K01, K03, K04	Standart Material
PM9903	POM	Black	-	-40/+100	K01, K03, K04	Standart Material
PM9905	Glass Fiber POM	Black	-	40/+110	K518	High Load Bearing Capacity
PK7502	X-tone	Black	75 Shore D	-40/+120	K800	Standart Material
PA9901	PA	White	-	-40/+100	Back up ring, special products, K155	Standart Material
PA9904	Glass Fiber PA	Black	-	-40/+120	K501, K518X	High Load Bearing Capacity
PA9910	PA	Black	-	-40/+130	K19X, K19L	High Temperature
UP9901	UHMW-PE	White	-	200/+80	K01, K03, K04	Standart Material
UP9902	UHMW-PE	Blue	-	200/+80	K01, K03, K04	High Performance

Composite Materials
Material Code	Definition	Color	Hardness	Temperature Range (°C)	Product Groups	Description
FB8001	Fabric Coated NBR	Black	-	-30/+100	K01, K03, K16, K34, K36, K37,K39,K43, K154, K502, K504, K505	Standart Material
FB8005	Fabric Coated FKM K	Brown	-	-20/+140	Products with the same code can be produced with FB8001	Standart Material
FB8009	Fabric Coated NBR	Black	-	-30/+100	Products with the same code can be produced with FB8001	Low Temperature
FB8502	Fabric Coated NBR	Brown	-	-30/+100	K150, K151, K152, K153, K155	Special for Water Based Applications
FB7003	Fabric Coated FKM	Brown	-	-20/+200	Products with the same code can be produced with FB8001	High Temperature
FB9001	Fabric Coated NBR	Black	-	-30/+100	K01, K03, K04	Standart Material
FT9901	Fabric Coated PTFE	Light Brown	-	-40/+250	Products with the same code can be produced with FB8001	High Performance EU 10/2011
PH6501	Composite	Brown	-	-40/+130	K75	Synthetic Fabric Phenolic Resin PTFE Reinforced
PH6502	Composite	Brown	-	-40/+120	K76, KSB	Polyester Fabric Phenolic Resin
PH6503	Composite	Dark Grey	-	-40/+100	K79	Synthetic Fabric Phenolic Resin Graphite Reinforced
PH6504	Composite	Dark Grey	-	-40/+200	K78	Aramide Fabric Phenolic Resin Graphite Reinforced
PR6501	Composite	Green	-	-40/+120	K73, KPB	Synthetic Fabric Phenolic Resin PTFE Reinforced

PTFE
Material Code	Definition	Color	Hardness	Temperature Range (°C)	Product Groups	Description
PT5501	PTFE	White	55 Shore D	-200 /+260	Back Up Rings	• It is a material that does not contain any filling material. • It is generally used in the production of back-up rings and in systems where high mechanical properties are not desired. • It is widely used in back-up ring production.
PT5505	Glass Fiber PTFE MoS2	Grey	55 Shore D	-200 /+260	K17, K19, K35, K41, K151, K701, K702, K703, K704, K705, K706, K716, K751, K752, K753, K755, K757	• Suitable for use in water-based oils. • It has the feature of increasing the elongation strength in glass fiber material. • It significantly increases the abrasion resistance. • Able to work at high pressures • Its electrical properties are like pure PTFE. • It should be used on tough contact surfaces. • It is suitable for high frequency low stroke applications.
PT6003	PTFE Bronze	Green	60 Shore D	-200 /+260	K17, K19, K35, K41, K151, K701, K702, K703, K704, K705, K706, K716, K751, K752, K753, K755, K757, KBT	of applications in hydraulic cylinder rod and pistons with different design examples. • The most suitable solution for mineralbased hydraulic oils. • Very low wear. • Good dimension stabilization. • Resistance to deformation under high pressure. • High pressure resistance.
PT6005	PTFE Carbografite	Black	60 Shore D/td>	-200 /+260	K17, K19, K35, K41, K151, K701, K702, K703, K704, K705, K706, K716, K751, K752, K753, K755, K757, KBT, K715	• Carbon particles decrease the elongation amount of the material and increase the yield strength. • Increases hardness and thermal resistance. • It has good wear resistance and performs well in oil-free dry runs. • It can be used in water and oil fluids. • Recommended for pneumatic systems, bearings, rotary systems without lubrication.
PT6009	TFM PTFE	White	60 Shore D	-200 /+260	Back Up Rings	• Less deformation under load. • It has less space and a dense structure. • Low permeability. • The structure does not soften under pressure at high temperatures. • Good surface quality of parts produced by machining. • Excellent chemical resistance
PT6023	TFM PTFE %10 Carbon Fiber	Black	60 Shore D	-200 /+260	K17, K19, K35, K41, K151, K701, K702, K703, K704, K705, K706, K716, K751, K752, K753, K755, K757, KBT	• Less deformation under load. • High pressure strength, modulus of elasticity and increased stiffness. • Suitable for use in systems with high speed and frequency. • Can be used in hydraulic fluids where chemically inert-strong alkali and glass reinforced compounds fail. • Good wear, friction and sliding properties in both dry and wet applications

STANDARD PNEUMATIC MATERIALS

Elastomers
Material Code	Definition	Color	Hardness	Temperature Range (°C)	Product Groups	Approvals and Specifications	Description
NB7001	NBR	Black	70 Shore A	-30/+105	K30, K67, K109, K715, K54, K55, K57, K58, K61, K62, K63, K65, K761		Standart Material	• ACN (Acrylonitrile) ratio is the most determining detail. • ACN affects hardness, tensile strength and abrasion resistance. • The butadiene part provides low temperature and elasticity. At the same time, the double bond required for vulcanization is on the butadiene side. • Therefore, a lower ACN level indicates better low temperature performance. • Very good compression set; It has flexibility and good gas permeability. • Good resistance to mineral oils, grease and fuels. • Resistant to based on aliphatic hydrocarbons (Propane, butan)
NB7012	NBR	Black	70 Shore A	-50/+105	K30, K67, K109, K715, K54, K55, K57, K58, K61, K62, K63, K65, K761		Low Temperature
NB7501	NBR	Black	75 Shore A	-30/+105	K25, 131
NB8001	NBR	Black	80 Shore A	-30/+105	K56, K106, K130, K50, K59, K61, K66		Standart Material
NB8010	NBR	Black	80 Shore A	-40/+105			Low Temperature
NB8501	NBR	Black	85 Shore A	-30/+105	K506		Low Temperature
NB9001	NBR	Black	90 Shore A	-30/+105	K52, K53		Standart Material
NB9011	NBR	Black	90 Shore A	-40/+105			Low Temperature
FK7001	NBR	Brown	70 Shore A	-20/+200	K54, K55, K57, K62, K63		High Temperature	• Its resistance to many chemicals is very good. • It is used in systems that require low gas permeability. • It is widely used in iron-steel and automotive industries.
FK7501	NBR	Brown	75 Shore A	-20/+200	K25		High Temperature
FK8001	NBR	Brown	80 Shore A	-25/+200	K30, K56, K130, K50, K58, K59, K59F		High Temperature
FK9001	FKM	Brown	90 Shore A	-20/+200	K52, K53, K64, K106, K58		High Temperature
HB7001	HNBR	Black	70 Shore A	-30/+150		DVGW B2/H3	Standart Material	• HNBR is generally used in production processes that require high temperature resistance. • It has very good mechanical properties and abrasion resistance.
HB7007	HNBR	Black	70 Shore A	-40/+150			Low Temperature
HB8001	HNBR	Black	80 Shore A	-30/+150			Standart Material
HB8005	HNBR	Black	80 Shore A	-40/+150	K54, K55, K57, K62, K63		Low Temperature
HB9001	HNBR	Black	90 Shore A	-30/+150			Standart Material
EP7001	EPDM	Black	70 Shore A	-40/+150				Resistance to hot water and water vapor, as well as many acids and alkaline solutions. • EPDM rubber makes it the optimum material for equipment used in the food and beverage industry.

Thermoplastic Elastomers
Material Code	Definition	Color	Hardness	Temperature Range (°C)	Product Groups	Approvals and Specifications	Description
PU8502	TPU	Blue	85 Shore A	-30/+100	K50, K59F, K59		Low Temperature	It has good resistance to mineral oils, greases, water and oil mixtures, aliphatic hydrocarbons. Although the operating temperature range varies between -30 ˚C / + 80 ˚C, it can go up to +100 ˚C in mineral oils. Poor resistance to polar solvents, aromatics, brake fluids, acids and alkalines. It has high mechanical strength. Its abrasion resistance is strong. There is a wide variety in elasticity modulus. The variety of hardness is high. Ozone and oxidation resistance is very good.
PU9201	TPU	Blue	92 Shore A	-40/+100	K52, K53, K64, K58		Standart Material
PU9204	TPU	Blue	92 Shore A	-50/+100	K51, K50, K160, K161	FDA, Low Temperature EU 10/2011	Low Temperature
PU9401	TPU	Blue	94 Shore A	-30/+100	K51		Standart Material
PU9404	TPU	Blue	94 Shore A	-30/+110			High Temperature and Abrasion Resistance
TP5501	TPE	Grey	55 Shore D	-40/+100	K56		Standart Material	• It combines the flexibility of rubber, the strength of plastic and the easy processing of thermoplastics. • It is highly resistant to tears, stretching of cuts, creeping and abrasion. • Its mechanical properties provide unmatched toughness as well as the tensile and bending strength you need. • Chemically resistant to hydrocarbons and many other fluids.

Engineering Plastics
Material Code	Definition	Color	Hardness	Temperature Range (°C)	Product Groups	Approvals and Specifications	Description
PM9901	POM	White	-	-40/+100	K58, K61, K70		Standart Material	• -40 / + 110 ˚C operating temperature range. • It is generally used as a guiding element in hydraulic and pneumatic systems. • It has perfect dimension stabilization up to +80 ˚C. • Glass fiber reinforced provides high contact pressure resistance.
PM9903	POM	Black	-	-40/+100	K58, K61, K70		Standart Material
PK7502	X-tone	Black	75 Shore D	-40/+120	K58, K61, K70		Standart Material	• It can be used in rotary and linear motion systems as the main sealing element. • It has high load bearing capacity and shock absorption, so it can be used as a guiding element. • With its high tensile and elongation strength, it is used as a back up ring material and can provide safe operation in high yield gaps. • With its water vapor and moisture resistant structure, it works safely in systems containing water without taking the water inside. • Provides ease of installation with its high flexibility.
PA9901	Poliamid	White	-	-40/+100			Standart Material	• It has the ability to work under load for a long time. • It is resistant to bending and abrasion. • Hardness and shock absorption feature, high electrical insulation, resistance to chemicals, are the most obvious usage advantages. • Glass fiber reinforced provides high contact pressure resistance.
UP9901	UHMWPE	White	-	-200/80		FDA	Standart Material	• Low friction coefficient. • Excellent abrasion resistance. • High impact and cut resistance. • Resistance to chemicals. • It has a structure that is not affected by moisture and water.
UP9902	UHMWPE	Blue	-	-200/80		FDA	High Performance

Composite Materials
Material Code	Definition	Color	Hardness	Temperature Range (°C)	Product Groups	Approvals and Specifications	Description
PH6503	Composite	Dark Grey	-	-40/+100	K79	Synthetic Fabric Phenolic Resin Graphite Reinforced	-	They are materials used for guiding elements with high load bearing capacity.

PTFE
Material Code	Definition	Color	Hardness	Temperature Range (°C)	Product Groups	Approvals and Specifications	Description
PT5501	PTFE	White	55 Shore D	-200/+260		Synthetic Fabric Phenolic Resin Graphite Reinforced		• It is a material that does not contain any filling material. •It is generally used in the production of back-up rings and in systems where high mechanical properties are not desired. •It is widely used in back-up ring production.
PT6005	PTFE Carbografite	Black	60 Shore D	-200/+260	K56, K715, K58, K761	Carbografite Filled, WRAS, NORSOK M710		• Carbon particles decrease the elongation amount of the material and increase the yield strength. • Increases hardness and thermal resistance. • It has good wear resistance and performs well in oil-free dry runs. • It can be used in water and oil fluids. • Recommended for pneumatic systems, guidings, rotary systems without lubrication.

Elastomers

Elastomers
Material Code	Definition	Color	Hardness	Temperature Range (°C)			Approvals and Specifications	Description
				Min.	Maks.	Short Term
AF6001	FEPM	Black	60 Shore A	-10	200	220
AF7001	FEPM	Black	70 Shore A	-10	200	220
AF8001	FEPM	Black	80 Shore A	-10	200	220
AF8501	FEPM	Black	85 Shore A	-10	200	220
AF9001	FEPM	Black	90 Shore A	-10	200	220
EP5001	EPDM	Black	50 Shore A	-40	140	160		• Used where high flexibility and mechanical properties are required. • It has a very good compression set value. • It has good resistance against inorganic chemicals. • Oil, organic fluid and ozone resistance is low.
EP5003	EPDM	Black	50 Shore A	-40	140	160	Suitable for drinking water
EP5004	EPDM	Black	50 Shore A	-40	140	160	KTW W270
EP5501	EPDM	Black	55 Shore A	-40	140	160
EP5502	EPDM	Black	55 Shore A	-40	140	160	Suitable for drinking water
EP5503	EPDM	Black	55 Shore A	-40	140	160	Suitable for AdBlue
EP6001	EPDM	Black	60 Shore A	-40	140	160
EP6006	EPDM	Black	60 Shore A	-40	140	160	FDA BfR.3
EP6007	EPDM	Black	60 Shore A	-40	140	160
EP6008	EPDM	Black	60 Shore A	-40	140	160	KTW W270
EP6008	EPDM	Black	60 Shore A	-40	140	160	FDA
EP6501	EPDM	Black	65 Shore A	-40	140	160
EP6503	EPDM	Black	65 Shore A	-40	140	160	KTW
EP7001	EPDM	Black	70 Shore A	-40	140	160
EP7004	EPDM	Black	70 Shore A	-40	140	160	Suitable for drinking water
EP7005	EPDM	Black	70 Shore A	-40	140	160	Suitable for DOT4
EP7006	EPDM	Black	70 Shore A	-40	140	160	WRAS, KTW, W270, FDA, 3A Sanitary, DVGW
EP7007	EPDM	Black	70 Shore A	-40	140	160	FDA
EP7008	EPDM	Black	70 Shore A	-40	140	160	Suitable for drinking water
EP7009	EPDM	Black	70 Shore A	-40	140	160	WRAS, KTW, W270
EP7010	EPDM	Black	70 Shore A	-40	140	160	FDA, BfR.3
EP7012	EPDM	Green	70 Shore A	-40	140	160	FDA
EP7501	EPDM	Black	75 Shore A	-40	140	160
EP7504	EPDM	Black	75 Shore A	-40	140	160	Suitable for drinking water
EP8001	EPDM	Black	80 Shore A	-40	140	160
EP8002	EPDM	Black	80 Shore A -	-40	140	160	Suitable for drinking water
EP8003	EPDM	Black	70 Shore A	-40	140	160	FDA
EP8004	EPDM	Black	80 Shore A	-40	140	160	FDA, BfR.3
EP8501	EPDM	Green	85 Shore A	-40	140	160	FDA
EP8502	EPDM	Black	85 Shore A	-40	140	160	Suitable for drinking water
EP9001	EPDM	Black	90 Shore A	-40	140	160
FK6001	FKM	Brown	60 Shore A	-20	200	250		• Its resistance to many chemicals is very good. • It is used in systems that require low gas permeability. • It is widely used in iron-steel and automotive industries.
FK6002	FKM	Green	60 Shore A	-20	200	250
FK6003	FKM	Black	60 Shore A	-20	200	250	FDA (Water and Oil)
FK6004	FKM	Red Brown	60 Shore A	-20	200	250	FDA
FK6501	FKM	Brown	65 Shore A	-20	200	250
FK7001	FKM	Brown	70 Shore A	-20	200	250
FK7004	FKM	Brown	65 Shore A	-20	200	250
FK7013	FKM	Brown	65 Shore A	-20	200	250
FK7016	FKM	Brown	65 Shore A	-30	200	250	Low Temperature, FDA
FK7017	FKM	Black	65 Shore A	-20	200	250	FDA (Water and Oil)
FK7019	FKM	Red Brown	70 shore A	-20	200	250	FDA
FK7501	FKM	Brown	75 Shore A	-10	200	250
FK8001	FKM	Brown	80 Shore A	-10	200	250
FK8003	FKM	Green	80 Shore A	-10	200	250
FK8004	FKM	Black	80 Shore A	-10	200	250
FK8005	FKM	Brown	80 Shore A	-10	200	250
FK8009	FKM	Brown	80 Shore A	-10	200	250
FK8013	FKM	Brown	80 Shore A	-30	200	250	Low Temperature
FK8014	FKM	Black	80 Shore A	-20	200	250	FDA (Water and Oil)
FK8015	FKM	Red Brown	80 Shore A	-20	200	250	FDA
FK8501	FKM	Brown	85 Shore A	-20	200	250
FK8502	FKM	Green	85 Shore A	-20	200	250
FK8503	FKM	Black	85 Shore A	-20	200	250
FK9001	FKM	Brown	90 Shore A	-20	200	250
FK9004	FKM	Green	90 Shore A	-20	200	220
FK9005	FKM	Black	90 Shore A -	-20	200	220
FK9009	FKM	Brown	90 Shore A	-20	200	220	Low Temperature
HB6001	HNBR	Black	60 Shore A	-30	150	160		• HNBR is generally used in production processes that require high temperature resistance. • It has very good mechanical properties and abrasion resistance.
HB6002	HNBR	Red	60 Shore A	-30	150	160	FDA
HB6501	HNBR	Black	60 Shore A	-30	150	160
HB7001	HNBR	Black	70 Shore A	-30	150	160	DVGW B2/H3
HB7003	HNBR	Green	70 Shore A	-30	150	160
HB7007	HNBR	Black	70 Shore A	-40	150	160	Low Temperature
HB7008	HNBR	Red	70 Shore A	-30	150	160
HB7501	HNBR	Black	75 Shore A	-30	150	160
HB7502	HNBR	Green	75 Shore A	-30	150	160
HB8001	HNBR	Black	80 Shore A	-30	150	160
HB8005	HNBR	Black	80 Shore A	-40	150	160	Low Temperature
HB8006	HNBR	Red	80 Shore A	-30	150	160	FDA
HB8501	HNBR	Black	85 Shore A	-20	150	160
HB9001	HNBR	Black	90 Shore A	-20	150	160
HB9002	HNBR	Green	90 Shore A	-30	150	160
HB9301	HNBR	Black	93 Shore A	-30	150	160
NB5503	NBR	Red	55 Shore A	-25	105	120	Diesel EN590	• ACN (Acrylonitrile) ratio is the most determining detail. • ACN affects hardness, tensile strength and abrasion resistance. • The butadiene part provides low temperature and elasticity. At the same time, the double bond required for vulcanization is on the butadiene side. • Therefore, a lower ACN level indicates better low temperature performance. • Very good compression set; It has flexibility and good gas permeability. • Good resistance to mineral oils, grease and fuels. • Resistant to based on aliphatic hydrocarbons (Propane, butane).
NB6001	NBR	Black	60 Shore A	-30	105	120
NB6005	NBR	Red	60 Shore A	30 1	105	120
NB6006	NBR	Black	60 Shore A	-30	105	120	EN549 B2/H2
NB6007	NBR	Black	60 Shore A	-30	105	120	FDA BfR.3
NB6008	NBR	Black	60 Shore A	-30	105	120	DVGW B2/H2
NB6009	NBR	Blue	60 Shore A	-30	105	120	FDA
NB6501	NBR	Black		-30	105	120
NB6505	NBR	Red	65 Shore A	-30	105	120
NB6506	NBR	Black	65 Shore A	-30	105	120	EN549 B2/H2
NB7001	NBR	Black	70 Shore A	-30	105	120
NB7006	NBR	Black	70 Shore A	-30	105	120	DVGW B2/H3
NB7012	NBR	Black	70 Shore A	-55	105	120	Low Temperature
NB7018	NBR	Black	70 Shore A	-30	105	120	Diesel EN590
NB7019	NBR	Black	70 Shore A	-30	105	120	FDA
NB7022	NBR	Red	70 Shore A	-25	105	120	Diesel EN590
NB7023	NBR	Black	70 Shore A	-30	105	120	FDA BfR.2
NB7024	NBR	Black	70 Shore A	-30	105	120	Sulfur Free
NB7025	NBR	Blue	70 Shore A	-30	105	120	FDA
NB7501	NBR	Black	75 Shore A	-30	105	120
NB7503	NBR	Black	75 Shore A	-30	105	120	EN549 B2/H3
NB7506	NBR	Black	75 Shore A	-30	105	120
NB8001	NBR	Black	80 Shore A	-30	105	120
NB8010	NBR	Black	80 Shore A	-40	105	120	Low Temperature
NB8011	NBR	Black	80 Shore A	-30	105	120	EN549 B2/H3
NB8015	NBR	Black	80 Shore A	-30	105	120	FDA BfR.3
NB8017	NBR	Blue	80 Shore A	-30	105	120	FDA
NB8501	NBR	Black	85 Shore A	-30	105	120
NB8505	NBR	Black	85 Shore A	-30	105	120	DVGW B2/H3
NB8506	NBR	Black	85 Shore A	-30	105	120	Low Temperature
NB8508	NBR	Black	85 Shore A	-30	105	120	Diesel EN590
NB9001	NBR	Black	90 Shore A	-30	105	120
NB9010	NBR	Brown	90 Shore A	-30	105	120
NB9011	NBR	Black	90 Shore A	-40	105	120	Low Temperature
NB9013	NBR	Black	90 Shore A	-30	105	120	EN549 B2/H3
NB9501	NBR	Black	95 Shore A	-30	105	120
CR5001	CR	Black	50 Shore A	-40	100	110		It is very resistant to rupture, tear and abrasion. • It is resistant to flame. • It is used where resistance to oil and atmospheric conditions is required at the same time. • Its abrasion resistance and mechanical properties are very good. • Low elasticity than natural rubber at low hardness. • Resistant to heat, air and ozone.
CR6001	CR	Black	60 Shore A	-40	100	110
CR6501	CR	Black	65 Shore A	-40	100	110
CR7001	CR	Black	70 Shore A	-40	100	110
CR7501	CR	Black	75 Shore A	-40	100	110
CR8001	CR	Black	80 Shore A	-40	100	110
CR9001	CR	Black	90 Shore A	-40	100	110
NR4201	NR	Black	42 Shore A	-60	80	90		• Used where high flexibility and mechanical properties are required. • It has a very good compression set value. • It has good resistance against inorganic chemicals. • Oil, organic fluid and ozone resistance is low.
NR5001	NR	Black	50 Shore A	-60	80	90
NR5501	NR	Black	55 Shore A	-60	80	90
NR5502	NR	Black	55 Shore A	-60	80	90
NR6001	NR	Black	60 Shore A	-60	80	90
NR6501	NR	Black	65 Shore A	-60	80	90
NR7001	NR	Black	70 Shore A	-60	80	90
NR8001	NR	Black	80 Shore A	-60	80	90
SL3501	VMQ	Various Options	35 Shore A	-60	200	250		• Its ozone, oxygen and UV resistance is high. • It has high temperature resistance as it has saturated oxygen-silicon bonds. • On the other hand, their oil and fuel resistance is lower, gas permeability is very high. • It doesn't provide the necessary mechanical strength for dynamic applications. • Used in applications requiring high temperatures.
SL4001	VMQ	Various Options	40 Shore A	-60	200	250
SL4501	VMQ	Various Options	45 Shore A	-60	200	250
SL5001	VMQ	Various Options	50 Shore A	-60	200	250
SL5002	VMQ	Various Options	50 Shore A	-60	200	250	FDA
SL5003	VMQ	Blue	50 Shore A	-60	200	250	FDA Metal ve X-Ray dedektörleri ile tespit edilebilir.
SL5501	VMQ	Various Options	55 Shore A	-60	200	250
SL5502	VMQ	Various Options	55 Shore A	-60	200	250
SL6001	VMQ	Various Options	40 Shore A	-60	200	250
SL6501	VMQ	Various Options	65 Shore A	-60	200	250
SL7001	VMQ	Various Options	70 Shore A	-60	200	250
SL7007	VMQ	Various Options	70 Shore A	-60	200	250
SL8001	VMQ	Various Options	80 Shore A	-60	200	250
SL8501	VMQ	Various Options	85 Shore A	-60	200	250	FDA
SL8502	VMQ	Various Options	80 Shore A	-60	200	250	FDA
FS7001	VMQ	Black	70 Shore A	-60	130	200

POLYURETHANES

Polyurethanes
Material Code	Definition	Color	Hardness	Temperature Range (°C)			Approvals and Specifications	Description
				Min.	Maks.	Short Term
PU8502	TPU	Blue	85 Shore A	-30	100	110		to mineral oils, greases, water and oil mixtures, aliphatic hydrocarbons. Although the operating temperature range varies between -30 ˚C / + 80 ˚C, it can go up to +100 ˚C in mineral oils. Poor resistance to polar solvents, aromatics, brake fluids, acids and alkalines. It has high mechanical strength. Its abrasion resistance is strong. There is a wide variety in elasticity modulus. The variety of hardness is high. Ozone and oxidation resistance is very good.
PU9201	TPU	Blue	92 Shore A	-40	100	110
PU9204	TPU	Blue	92 Shore A	-50	100	110	FDA,Low Temperature EU 10/2011
PU9401	TPU	Blue	94 Shore A	-35	100	110
PU9404	TPU	Blue	94 Shore A	-35	110	120
PU9409	TPU	Violet	94 Shore A	-30	110	120	Suitable for Fire-resistant Oils
PU9411	TPU	Cerise	94 Shore A	-35	120	140	High Temperature
PU9501	TPU	Blue	95 Shore A	-30	90	100
PU6001	TPU	Blue	60 Shore D	-30	100	110
PU6401	TPU	Blue	64 Shore D	-30	100	110
PU7301	TPU	Blue	73 Shore D	-30	100	110

ENGINEERING PLASTICS

Engineering Plastics
Material Code	Definition	Color	Hardness	Temperature Range (°C)			Approvals and Specifications	Description
				Min.	Maks.	Short Term
PK7501	PK	Honey foam	75 Shore D	-40	120	140		• It can be used in rotary and linear motion systems as the main sealing element. • It has high load bearing capacity and shock absorption, so it can be used as a guiding element. • With its high tensile and elongation strength, it is used as a back up ring material and can provide safe operation in high yield gaps. • With its water vapor and moisture resistant structure, it works safely in systems containing water without taking the water inside. • Provides ease of installation with its high flexibility.
PK7502	PK	Black	75 Shore D	-40	120	140
PM9901	POM	White	-	-40	100	-		• -40 / + 110˚C operating temperature range. • It is generally used as a guiding element in hydraulic and pneumatic systems. • It has perfect dimension stabilization up to +80˚C. • Glass fiber reinforced provides high contact pressure resistance.
PM9902	POM	White	-	-40	100	120	Glass Fiber Reinforced
PM9904	POM	White	-	-40	100	110	PTFE Reinforced
PM9905	POM	Black	-	-40	110	120	Glass Fiber Reinforced, WRAS
PM9909	POM	Black	-	-40	100	110	Glass Sphere Reinforced
PA9901	PA	White	-	-40	100	-		• It has the ability to work under load for a long time. • It is resistant to bending and abrasion. • Hardness and shock absorption feature, high electrical insulation, resistance to chemicals, are the most obvious usage advantages. • Glass fiber reinforced provides high contact pressure resistance
PA9902	PA	White	-	-50	120	140	Glass Fiber Reinforced
PA9903	PA	White	-	-50	120	140	Glass Fiber and PTFE Reinforced
PA9904	PA	Black	-	-50	120	140	Glass Fiber Reinforced
PA9905	PA	White	-	-50	100	120	Glass Fiber Reinforced
PA9910	PA	Naturel	-	-40	130	150	Glass Fiber Reinforced
TP5501	TPE	Grey	55 Shore D	-40	100	120		• It has the ability to work under load for a long time. • It is resistant to bending and abrasion. • Hardness and shock absorption feature, high electrical insulation, resistance to chemicals, are the most obvious usage advantages. • Glass fiber reinforced provides high contact pressure resistance.
TP6301	TPE	Black	63 Shore D	-40	100	120
TP7301	TPE	Black	72 Shore D	-40	100	120
UP9901	UHMWPE	White	-	-200	80	90	FDA	Low friction coefficient. • Excellent abrasion resistance. • High impact and cut resistance. • Resistance to chemicals. • It has a structure that is not affected by moisture and water.
UP9902	UHMWPE	Blue	-	-200	90	100	FDA

PTFE

PTFE
Material Code	Definition	Color	Hardness	Temperature Range (°C)			Approvals and Specifications	Description
				Min.	Maks.	Short Term
PT5501	PTFE	White	55 Shore D	200	260	280		PTFE's excellent chemical resistance is based on the strong bond between carbon and fluorine atoms. In order to break these bonds, the contact material has to use a lot of energy; this is generally not possible in food and pharmaceutical applications. PTFE; is extremely resistant to all acids, bases, alcohols, ketones, gasoline, oil and other substances. Thanks to it's low friction coefficient and high wear resistance, they can be used in applications requiring high speed, in the temperature range of -200° C to + 260° C.
PT5502	PTFE	Honey foam	55 Shore D	200	260	280	PI Filled
PT5503	PTFE	White	55 Shore D	200	260	280	Mineral Filled, FDA
PT5504	PTFE	Black	55 Shore D	200	260	280	Graphite Filled, Wras
PT5505	PTFE	Black	55 Shore D	200	260	280	Glass Fiber + MoS2 Filled
PT5506	PTFE	Cream	55 Shore D	200	260	280	LCP Filled, FDA, EU 1935/2004
PT5507	PTFE	White	55 Shore D	200	260	280	Glass Fiber Filled, FDA
PT5509	PTFE	Black	55 Shore D	200	260	280	Soft Carbon Filled, FDA, EU 1935/2004
PT5511	PTFE	White	55 Shore D	200	260	280	FDA, EU 1935/2004, 3A Sanitary, USP Class VI, NORSOK M710, KTW, W270, WRAS, ACS, BELGAQUA, DVGW
PT5512	PTFE	Honey foam	55 Shore D	200	260	280	PI Filled
PT6003	PTFE	Green	60 Shore D	200	260	280	Bronze Filled
PT6005	PTFE	Black	60 Shore D	200	260	280	Carbografite Filled, WRAS, NORSOK M710
PT6009	PTFE	White	60 Shore D	200	260	280	Modifye PTFE, WRAS, KTW, W270, FDA, EU 1935/2004
PT6011	PTFE	Brown	60 Shore D	200	260	280	Carbon Fiber Filled
PT6014	PTFE	White	60 Shore D	200	260	280	Carbon Fiber Filled
PT6017	PTFE	Dark Grey	60 Shore D	200	260	280	Mineral Filled
PT6018	PTFE	White	60 Shore D	200	260	280	Glass Fiber Filled, WRAS, FDA, EU 1935/2004, Hijyen, NORSOK M710
PT6019	PTFE	Grey	60 Shore D	200	260	280	FDA, EU 1935/2004, 3A Sanitary
PT6020	PTFE	Bordo	60 Shore D	200	260	280	Glass Fiber Filled, WRAS, KTW, W270
PT6021	PTFE	Cream	60 Shore D	200	260	280	PEEK Filled, FDA, EU 1935/2004
PT6023	PTFE	Black	60 Shore D	200	260	280	Carbon Fiber Filled Modifye
PT6024	PTFE	Dark Grey	60 Shore D	200	260	280	Special Stainless Steel Filled, FDA, EU 1935/2004
PT6025	PTFE	Dark Grey	60 Shore D	200	260	280	Stainless Steel and Carbon Fiber
PT6027	PTFE	Blue	60 Shore D	200	260	280	Detectable with metal and X-ray, FDA, EU 1935/2004
PT6028	PTFE	Black	60 Shore D	200	260	280	Carbografite Filled
PT6502	PTFE	Black	65 Shore D	200	260	280	Hard Carbon Filled
PT6504	PTFE	Dark Grey	65 Shore D	200	260	280	Special Filled Suitable for Use in Compressor

SMART SEAL MATERIALS

Smart Seal Materials
Material Code	Definition	Color	Hardness	Temperature Range (°C)			Approvals and Specifications	Description
				Min.	Maks.	Short Term
JPU8801	TPU	Light Green	88 Shore A	-30	100	115		These materials can be produced by machining method.
JPU9402	TPU	Green	88 Shore A	-30	100	115
JPU9403	TPU	Blue	95 Shore A	-30	100	105	FDA
JPU9405	TPU	Dark Red	95 Shore A	-30	100	120	Low Friction
JPU9406	TPU	Blue	95 Shore A	-50	100	105	FDA, EU 1935/2004, Low Temperature
JPU9407	TPU	Red	95 Shore A	-30	100	120	FDA
JPU9408	TPU	Violet	95 Shore A/td>	-30	105	115	FDA, Chemical Resistance
JPU9409	TPU	Orange	95 Shore A	-30	120	135	High Temperature
JPU5701	TPU	Blue	57 Shore D	-30	110	120	High Hardness
JPU5702	TPU	Grey	57 Shore D	-30	110	120	Low Friction
JNB8001	NBR	Black	80 Shore A	-50	100	110	Low Temperature
JNB8501	NBR	Black	85 Shore A	-25	100	110
JNB8502	NBR	White	85 Shore A	-22	100	110	FDA, EU 1935/2004
JNB9501	NBR	Black	95 Shore A	-25	100	25
JHN8501	HNBR	Black	85 Shore A	-25	150	160
JHN8502	HNBR	Light Green	85 Shore A	-40	150	160	NORSOK M710
JHN8503	HNBR	Black	88 Shore A	-40	150	160	NORSOK M710, Low Temperature
JFK8501	FKM	Brown	85 Shore A	-20	210	250
JFK8502	FKM	Brown	85 Shore A	-25	210	250	FDA, EU 1935/2004
JFK8503	FKM	Black	85 Shore A	-25	210	250	KTW, W270
JFK8504	FKM	Black	85 Shore A	-30	210	250	NORSOK M710
JEP8501	EPDM	Black	85 Shore A	-50	130	150
JEP8502	EPDM	White	85 Shore A	-50	100	130	FDA, EU 1935/2004
JEP8503	EPDM	Black	85 Shore A	-45	120	150	KTW, W270
JSL8501	VMQ	Red	85 Shore A	-55	210	250	FDA, EU 1935/2004
JSL8502	VMQ	Blue	85 Shore A	-55	210	250	FDA, EU 1935/2004
JAF8501	FEPM	Black	85 Shore A	-15	210	250
JPM9901	POM	White	-	-40	100	110	FDA
JPA9901	PA	Cream	-	-30	100	120	FDA
JPA9902	PA	Cream	-	-40	100	120
JPK7501	PK	Honey foam	74 Shore D	-40	120	140
JPK9001	PEEK	Bej	90 Shore D	-50	250	310	FDA, EU 1935/2004, NORSOK M710
JPK9002	PEEK	Dark Grey	-	-40	260	310	Carbon Filled
JTP5501	TPE	Orange	55 Shore D	-40	100	120

COMPOSITE MATERIALS

Polyurethanes
Material Code	Definition	Color	Temperature Range (°C)			Approvals and Specifications	Description
			Min.	Maks.	Short Term
FB7003	Fabric Coated FKM	Brown	-20	200	210	High Temperature
FB8001	Fabric Coated NBR	Black	-30	100	110	Standart Material
FB8005	Fabric Coated FKM	Brown	-20	+140	150	Standart Material
FB8009	Fabric Coated NBR	Black	-30	100	110	Low Temperature
FB8502	Fabric Coated NBR	Brown	-30	100	110	Special for Water Based Applications
FT9901	Fabric Coated PTFE	Light Brown	-40	250	260	EU 10/2011	Homogenizers, submersible pumps, agitators, rotary joints.
FT9902	Fabric Coated PTFE	Light Brown	-40	250	260	FDA	Homogenizers, submersible pumps, agitators, rotary joints.
PH6501	Composite	Brown	-40	130	140	Synthetic Fabric Phenolic Resin PTFE Reinforced	They are materials used for guiding elements with high load bearing capacity.
PH6502	Composite	Brown	-40	120	130	Polyester Fabric Phenolic Resin
PH6503	Composite	Dark Grey	-40	120	130	Synthetic Fabric Phenolic Resin PTFE Reinforced
PH6504	Composite	Dark Grey	-40	200	220	Aramide Fabric Phenolic Resin Graphite Reinforced
PH6506	Composite	Light Tan	-40	120	130	Cotton Fabric Phenolic Resin
PR6501	Composite	Green	-40	120	130	Synthetic Fabric Phenolic Resin PTFE Reinforced	They are materials used for guiding elements with high load bearing capacity.
PR6502	Composite	Light Tan	-40	120	130	Cotton Fabric Phenolic Resin
PX9901	Composite	Grey	-100	160	170	Synthetic Fiber PTFE Fiber Epoxy Resin

Storage Conditions

During storage; Mechanical and physical properties of products made of elastomers, thermoplastics and thermoplastic elastomers may change. This change occurs as a result of the combination of many factors.

These factors are:

Oxygen and Ozone
Light
Temperature
Humidity
Deformation
Contact with Fluids
Contact with Metals
Cleaning

Elastomer, thermoplastic and thermoplastic elastomer products stored without being exposed to the above effects can be stored without losing their properties even for long periods.

Oxygen and Ozone

Oxygen or ozone are oxidizers that disrupt material structures. It should be packaged and stored in polyethylene materials suitable for sealing elements. Ozone is particularly destructive. For this reason, electrical devices, electric motors and similar ozone generating devices should not be found in the environments where the sealing elements are stored.

Light

Recommended storage conditions; are places protected from long-term fluorescent lamps, ultraviolet rays, strong light sources and direct sunlight. It is recommended to illuminate with red or orange colored light.

Humidity

It is recommended that the relative humidity in the storage environment be 60% and below. Also, very dry weather environments are not recommended.

Contact with Metals

Metals (such as manganese and copper) can have a devastating effect on some types of rubber. Therefore, it is recommended that the sealing elements are not in direct contact with metals or their alloys.

Temperature

The ideal temperature in storage conditions is between 5 °C and 25 °C. Low temperatures do not change the material structure, but its flexibility may decrease at low temperatures. For this reason, it is recommended to bring the sealing element temperature above 20 °C before assembly. In addition, it is recommended that sealing element is not affected by direct heat sources (radiators, hot water lines, etc.).

Deformation

Sealing elements should be protected without any load in a way that their original shape will not deteriorate. Products should be protected against external influences in their packages, and stored without deteriorating their circularity and profiles.

Contact with Fluids

Sealing elements should be protected from contact with solvents, greases and different types of oil during storage. Otherwise, mechanical properties and strengths may change.

Material	Storage Period
Thermoplastic Elastomers TPU (Polyurethane), TPE (Hytrel)	5 YEARS
Thermoplasticler (POM,PA,PK)	5 YEARS
SBR	5 YEARS
NR	5 YEARS
NBR	7 YEARS
HNBR	7 YEARS
ACM, AEM	7 YEARS
CIIR, IIR	7 YEARS
CR	7 YEARS
FKM	10 YEARS
VMQ	10 YEARS
EPDM	10 YEARS
FFKM	10 YEARS
FVMQ, PVMQ	10 YEARS
PTFE	Unlimited

The storage period is defined as above in the ISO 2230-2002 standard for elastomer materials, although the storage time may differ depending on the external factors specified on the side. It is recommended to check the physical condition of the stored products before use.

Am häufigsten gesucht:

SUCHE

Wissensdatenbank

Materialien

Standard Hydrolic Materials

STANDARD PNEUMATIC MATERIALS

Elastomers

POLYURETHANES

ENGINEERING PLASTICS

PTFE

SMART SEAL MATERIALS

COMPOSITE MATERIALS

Storage Conditions

Oxygen and Ozone

Light

Humidity

Contact with Metals

Temperature

Deformation

Contact with Fluids

Produkte

Markte

Innovation

Wissensdatenbank

Expertise

Medien

Unternehmen

Kontaktieren Sie Uns

Am häufigsten gesucht:

SUCHE

Wissensdatenbank

Materialien

Standard Hydrolic Materials

STANDARD PNEUMATIC MATERIALS

Elastomers

POLYURETHANES

ENGINEERING PLASTICS

PTFE

SMART SEAL MATERIALS

COMPOSITE MATERIALS

Storage Conditions

Oxygen and Ozone

Light

Humidity

Contact with Metals

Temperature

Deformation

Contact with Fluids

Weitere Informationen